Measuremt solution for shock wave
and Quality assurance

Müller Voltage Amplifier MVA 10

Low Noise Amplifier with 10 MHz Bandwidth for Thermocouples and Hydrophones

This Amplifier is perfect to use with our MCT Series Thermocouple. When used together with the 1 MHz filter, it has an excellent signal to noise ratio for the small signals of the type E or type K thermocouples.

A second application of this amplifier is for use with our Müller-Platte Needle Probe or the type M pressure sensors. The signal of these hydrophones are quite small in applications like ultrasound.. However, together with the MVA 10 the range of application extends to the complete field of ultrasound. This amplifier will be used with full 10 MHz bandwidth to measure signals in a plane or focused field as well as for sinus or pulsed waves.

Further applications and uses for the MVA 10 is use as a general preamplifier for oscilloscopes and transient recorders, photomultiplier or signal booster for optical receivers and current amplifiers.

Technical Data

Input Impedance: 1 MOhm, 15 pF
Input Voltage Noise: 4.7 nV/√Hz at 2 MHz
Input Noise: 100 μV (peak – peak)
Output Impedance: 50 Ohm
Output Voltage: ± 3,5 V
Max. Output Current: 100 mA
Gain: x100 or x1000, switchable
Gain Accuracy: ± 0.2 dB
Bandwidth DC: 1 Hz to 10 MHz
Rise Time: 35 ns
Supply Voltage: ± 15 V, power supply is included in the kit
Supply Current: ± 70 mA
Weight: 200 g
Housing Material: Al/Mg4.5Mn, nickel plated
Operating Temperature: 0 – 60°C
Connectors: BNC neg. for input and output
Absolute Max. Input Voltage: ± 5 V

Article-No. 200-120-1: Amplifier MVA 10: 10 MHz Voltage Amplifier incl. Power Supply
Article-No. 200-120-2: Low pass filter 1 MHz